Description
The Bitmain AntMiner APW3++ -12-1600 PSU is a robust and efficient power supply unit designed specifically for cryptocurrency mining operations. This AC-DC PSU combines high conversion efficiency and strong dynamic performance, making it an essential component for large-scale mining setups. The PSU is in used condition and will show signs of heavy wear and tear, but it maintains reliable performance.
Key Features:
- Airflow Direction: The airflow direction runs from the AC input to the DC output, aligning with most miners’ configurations, which is beneficial for effective heat management in large-scale operations.
- Protective Coating: The PCB features a conformal coating to prevent damage from high voltage spark discharges and external conductive particles or dust.
- High Temperature Tolerance: Can operate stably in environments with ambient temperatures up to 60°C. For temperatures above 60°C, underclocking is recommended.
- PCI-E Compatibility: Uses a PCI-E connector compatible with ATX PSUs and most Bitcoin mining machines.
Efficiency and Savings:
- Operating at 93.5% efficiency compared to 83% for secondhand general use PSUs can result in significant cost savings, potentially more than $150 USD per year in power fees, assuming an electricity cost of $0.10 per kWh.
Electronic Parameters:
- Output:
- DC Voltage: 12.15V
- Rated Current: 133A
- Rated Power: 1600W
- Ripple & Noise: <1%
- Voltage Regulation: <2%
- Source Regulation: <1%
- Load Regulation: <1%
- Setup, Rise Time: <5S
- Power off Protection Trip Time: >10mS
- Interface Type: 5 pairs of 6 pin PCI-E connectors, 350mm length for each PCI-E cable
- Input:
- Voltage Range: 176-264V AC
- Starting Voltage: 200-205V AC
- Frequency Range: 47-63Hz
- Power Factor: >0.95 (full load)
- Leakage Current: <1.5mA (220V 50Hz)
- Protection:
- Low-voltage Input: 171-181V AC
- Output Short Circuit: Yes
- Output Overcurrent: 134-150A
- Overheat Protection: Yes
- Environment Conditions:
- Operating Temperature: -20-60°C
- Operating Humidity: 20% – 90% relative humidity (non-condensing)
- Structure:
- Dimensions: 375 x 160 x 100mm
- Weight: 2.5kg
- Cooling: Forced-air cooling, air blowing direction from AC input to DC output
- Certification: FCC & CE certified
Important Notes:
- The PSU will not work with standard 110-120V power sources; it only operates on 220-240V.
- A power cord is not included; please use one with at least 16A capacity from your local market.
- Keep the original box for RMA requests.
- Specify if the PSU is to replace one in S4/S4+ for additional switch board inclusion.
Shipping: 1-2 weeks
